Download
Enquiry

LA610-63FS-C14
Panel Formwork (Shuttering) Cleaning Machines

LA610-63FS-C14 is automatic steel faced Panel Formwok (Shuttering) cleaning machine with a integrated Dust Collector. This machine removes concrete sticking on panel face, front faces and side faces. Dust produced during cleaning is extracted by Dust Collector.

Formwork (Shuttering) Panel size:

Panel width range : 200 to 610 mm
Panel Height range : 40 to 120 mm

LA610-63FS-C14
FeaturesProcessAdvantagesView With Roller Table

Machine Features

  • Three stage panel face cleaning
  • One stage of three scraper/scarifier and two stages of six twist knot steel wire cup type brushes, three in each stage
  • Each scraper, scarifier and brush diameter 8”
  • Each scraper, scarifier and brush mounted on independent, geared suspension for optimum panel interface and power packed action
  • Scraper, scarifier and brush pressure on Panel is adjustable
  • Individual as well as in group height adjustment for scrapers, scarifiers and brushes
  • Roller brushes for side faces cleaning
  • Movable roller brush for front faces cleaning
  • Roller conveyor adjustment for varying panel height and width

LA610-63FS-C14-STAGES

  • Lengthwise panel feeding
  • Automatic lubrication and conditioning
  • Integrated Dust Collector C14
  • Extended roller conveyor at machine ends for smooth panel feeding and removal after cleaning
  • Optional Roller table RT610
  • Output : 45 square meter / hour
  • Electrical connection : 15.7 Kw.
  • Machine weight : 3185 Kg
  • Machine size (L x W x H) in mm : 3641 X 1669 X 1805

LA610-63FS-C14-1

Panel Cleaning

  • Panel cleaning starts with machine setting
  • First vertically mounted scrapers/scarifiers and brushes height is set as per panel height
  • Next Roller conveyor is set as per panel width and panel height
  • Scrapers/scarifiers, brushes and conveyor setting done, machine is ready for cleaning operation
  • Panel is fed into Roller conveyor which carries it in automatic mode under the vertically mounted scrapers/scarifiers and brushes
  • When panel face comes in contact with rotating scrapers/scarifiers and brushes all cement deposit is removed and taken out by the Dust Collector. Dust is collected in removable container and clean air is released back into workshop.
  • Clean panel travels to machine exit

Machine Advantages

  • High quality panel cleaning
  • High productivity
  • Low operational cost
  • Huge labour cost saving
  • Dust free clean environment
  • Dry cleaning operation means no soil or underground water contamination
  • Nonstop machine operation
  • Minimum maintenance required, just routine oil filter and oil change
  • Machine is designed to achieve low noise level
LA610-63FS-C14 assembled with roller table RT610

LA610-63FS-C14-RT